Embedded Brake Pad Thermocouple Temperature Sensor

OVERVIEW

• Fast Response
• Type K Thermocouple
• 22 AWG Fiberglass insulated conductors, stranded
• Embed copper cap into brake pad


MADE IN THE USA


The Embedded Brake Pad Thermocouple Sensor is designed for use in R&D and Motorsports testing of brake pad temperature. The sensor is made in the USA with superior materials, designed to withstand even the most rigorous testing conditions. 

The Embedded Brake Pad Thermocouple Sensor is designed to deliver high performance temperature measurements, reliably and consistently. These temperature sensors are designed for Research and Development, test labs, manufacturing engineering and production environments. They can be customized for OEM applications as well.

Installation Instructions:
• Drill thru-hole in pad from backplate side using #31 drill bit (0.120")
• Route wires through hole from braking pad surface side and set cap flush with pad by lightly tapping with a hammer
• Sink cap depth about 1 to 2 mm into the pad surface using a nail set or punch, depth may need to be adjusted as brake pad wears

IMPORTANT NOTE: Please confirm with your instrument manufacturer that the instrument is compatible with a Type K thermocouple sensor.

Options:

Thermocouple Type
Thermocouple Cable Length
Thermocouple Connector
Thermocouple Junction Type
SKU
BPTC-036-G-FG-K-N
Availability
In Stock
0
Out of Stock
0
Discontinued
Off
Price
$14.75
Add to Cart

TECHNICAL SPECIFICATIONS

Thermocouple type: 

Type K

Sensing Junction:

Grounded or Ungrounded

Accuracy:

+/-0.4% of reading or about +/- 1.1°C (Special Limits of Error)

Operating Range:

-40°F to 1470°F (-40°C to +800°C)

Copper Cap dimensions:

OD = 0.125” x L = 0.150” (OD = 3.2 mm x L = 3.8 mm)

Response Time:

500 mS

Lead Wire:

22 AWG Fiberglass insulated conductors, stranded
3 foot (1 meter) lead wire length

 

VIDEOS

No Result Found