- Welcome Guest
- Login
- Register
- Contact Us
LVDT Position Sensors and Electronics
Questions? Contact us now at 248-636-1515 or e-mail us at sales@thesensorconnection.com
Questions? Contact us now at 248-636-1515 or e-mail us at sales@thesensorconnection.com
AC LVDT Position Sensor Spring Loaded GHSA-750 Series
|
The Macro Sensors GHSA 750 Series of 3/4 inch diameter spring-loaded AC-LVDTs are designed for a wide range of position measurement and dimensional gaging applications. These rugged hermetically sealed sensors are constructed entirely of stainless steel and intended for general industrial use. The coil windings are sealed against hostile environments to IEC standard IP-68. Electrical termination is through a sealed axial connector; the mating connector plug is supplied with a unit. |
$427.00 |
| View Product Detail Page |
DC LVDT Position Sensor Spring Loaded 24 V GHSER-750 Series
|
The Macro Sensors GHSER 750 Series of 3/4 inch diameter spring-loaded DC-LVDTs are designed for a wide range of position measurement and dimensional gaging applications. These rugged hermetically sealed sensors are constructed entirely of stainless steel and intended for general industrial use. The coil windings are sealed against hostile environments to IEC standard IP-68. Electrical termination is through a radially mounted sealed connector, which results in a much reduced installed length. The mating connector plug is supplied with a unit. The through-bore design allows for air purging of the sensor’s bearings to remove potential contaminants. |
$782.00 |
| View Product Detail Page |
DC LVDT Position Sensor Spring Loaded 24 VDC Input GHSE-750 Series
|
The Macro Sensors GHSE 750 Series of 3/4 inch diameter spring-loaded DC-LVDTs are designed for a wide range of position measurement and dimensional gaging applications. These rugged hermetically sealed sensors are constructed entirely of stainless steel and intended for general industrial use. The coil windings are sealed against hostile environments to IEC standard IP-68. Electrical termination is through a sealed axial connector; the mating connector plug is supplied with a unit.
|
$661.00 |
| View Product Detail Page |
Precision Gage Probes AC Operated .315" Diameter Plain Body BBP-315 Series
|
The Macro Sensors BBP LVDT family of 8 mm diameter pencil probe -type gaging probes offers ultra-precise measurement of dimensions in a wide variety of Q.C., SPC, and industrial metrology applications. They utilize a linear ball bearing assembly precisely fitted to a hardened-and-ground, non-rotating probe shaft to minimize radial play and the effects of side loading. This results in the probes' exceptional repeatability of 0.000006 inch (0.15 µm). |
$533.00 |
| View Product Detail Page |
DC LVDT Position Sensor Spring Loaded +/- 15 VDC Input Radial Connector GHSDR-750 Series
|
The Macro Sensors GHSDR 750 Series of 3/4 inch diameter spring-loaded DC-LVDTs are designed for a wide range of position measurement and dimensional gaging applications. These rugged hermetically sealed sensors are constructed entirely of stainless steel and intended for general industrial use. The coil windings are sealed against hostile environments to IEC standard IP-68. Electrical termination is through a radially mounted sealed connector, which results in a much reduced installed length. The mating connector plug is supplied with a unit. The through-bore design allows for air purging of the sensor’s bearings to remove potential contaminants.
|
$837.00 |
| View Product Detail Page |
Precision Gage Probes AC Operated .375" Diameter Threaded Body BBT-375 Series
|
The Macro Sensors BBT family of 3/8 inch diameter pencil-probe type gaging offers ultra-precise measurement of dimensions in a wide variety of Q.C., SPC, and industrial metrology applications. They utilize a linear ball bearing assembly precisely fitted to a hardened-and-ground, non-rotating probe shaft to minimize radial play and the effects of side loading. This results in the probes' exceptional repeatability of 0.000006 inch (0.15 µm). |
$559.00 |
| View Product Detail Page |
AC LVDT Position Sensor Spring Loaded Connector GHSAR-750 Series
|
The Macro Sensors GHSAR 750 Series of 3/4 inch diameter spring-loaded AC-LVDTs are designed for a wide range of position measurement and dimensional gaging applications. These rugged hermetically sealed sensors are constructed entirely of stainless steel and intended for general industrial use. The coil windings are sealed against hostile environments to IEC standard IP-68. Electrical termination is through a radially mounted sealed connector, which results in a much reduced installed length. The mating connector plug is supplied with a unit. The through-bore design allows for air purging of the sensor’s bearings to remove potential contaminants.
|
$558.00 |
| View Product Detail Page |
DC LVDT Position Sensor Spring Loaded +/- 15 V input GHSD-750 Series
|
The Macro Sensors GHSD 750 Series of 3/4 inch diameter spring-loaded DC-LVDTs are designed for a wide range of position measurement and dimensional gaging applications. These rugged hermetically sealed sensors are constructed entirely of stainless steel and intended for general industrial use. The coil windings are sealed against hostile environments to IEC standard IP-68. Electrical termination is through a sealed axial connector; the mating connector plug is supplied with a unit.
|
$713.00 |
| View Product Detail Page |
Precision Gage Probes AC Operated .375" Diameter Plain Body BBP-375 Series
|
The Macro Sensors BBP family of 3/8 inch diameter pencil-probe type gaging offers ultra-precise measurement of dimensions in a wide variety of Q.C., SPC, and industrial metrology applications. They utilize a linear ball bearing assembly precisely fitted to a hardened-and-ground, non-rotating probe shaft to minimize radial play and the effects of side loading. This results in the probes' exceptional repeatability of 0.000006 inch (0.15 µm). |
$543.00 |
| View Product Detail Page |
4-20 mA LVDT Position Sensor Spring Loaded GHSIR-750 Series
|
4-20 mA LVDT Position Sensor Spring Loaded Stroke 0.1 Inches 2.5 mm Macro Sensors’ GHSIR 750 Series of 3/4 inch (19 mm) diameter, spring-loaded, 4-20 mA loop-powered LVDT position transmitters are designed for a wide range of position monitoring and feedback applications. These rugged hermetically |
$816.00 |
| View Product Detail Page |
LVDT Economy Spring Loaded AC Operated GSA-750 Series
|
The GSA 750 series of short range spring loaded position sensors were developed for cost sensitive applications requiring LVDT reliability and performance. Available in ranges of ±0.10 inches to ±0.30 inches, these sensors offer the excellent measurement capabilities of an LVDT at very economical prices.
|
$225.00 |
| View Product Detail Page |
4-20 mA LVDT Position Sensor SI-750 Series
|
The SI 750 Series of 3/4 inch diameter, loop powered 4-20 mA LVDT position transmitters is designed for a wide range of position monitoring and feedback applications. Their stainless steel housings act as magnetic shields to reduce the effects of external AC magnetic fields, and their sealing meets IEC standard IP-62. |
$356.00 |
| View Product Detail Page |
AC-LVDT Spring-Loaded Cable GPA-750 Series
|
Macro Sensors has successfully bridged the gap between price and performance in industrial gaging applications with the GPA 750 Series Spring-Loaded AC-LVDT! |
$206.00 |
| View Product Detail Page |
Linear Position Sensor L50-T
|
Clevis Base Mounted The Everight Sensors L50 is an extremely robust linear position sensor designed to be mounted between the clevis tines to the base plate of a hydraulic cylinder, and reliably provide a proportional analog output over the sensor’s measuring range (2 to 40 inches) while operating in a heavy duty fluid power environment. |
call |
| View Product Detail Page |
LVDT AC Operated Hermetically Sealed Axial Connector HSA-750 Series
|
Macro Sensors’ HSA 750 Series of 3/4 inch (19 mm) diameter AC-operated LVDTs is designed for a wide range of position measurement applications. These are rugged hermetically sealed sensors, constructed entirely of stainless steel, and intended for general industrial use. The coil windings are sealed against hostile environments to IEC standard IP-68 and electrical termination is through a sealed radial connector located near one end. The mating connector plug is supplied with the unit. |
$315.00 |
| View Product Detail Page |
