- Welcome Guest
- Login
- Register
- Contact Us
LVDT & Rotary Position Sensors, LVDT Signal Conditioners, and Accessories
Buy online from The Sensor Connection today. We ship Worldwide!
AC & DC LVDT position sensors, linear position sensors, rotary position sensors, spring loaded LVDT position sensors, LVDT Signal Conditioners for Industrial and OEM custom applications
AC LVDT Signal Conditioner DIN Rail Mount LVC-2500 Series
|
The Macro Sensors LVC-2500 is a single channel signal conditioner that operates on 10-30 Volts DC power to support standard LVDT, RVDT, and VRT half-bridge sensors. Designed expressly for use in 24 Volt systems with PLCs and mini-PLCs, or in 12 Volt mobile and vehicular testing systems, it offers the user a choice of three analog outputs: 0 to ±10 V DC, 0 to 10 V DC, or 4 to 20 mA (sourcing) current loop in a 3-wire common ground system in which the power ground is connected to the output signal's ground.
|
$482.00 |
| View Product Detail Page |
LVDT General Purpose, AC Operated, 0.375" Diameter CD-375 Series
|
Macro Sensors’ LVDT CD 375 Series of 3/8 inch (9.5 mm) diameter AC-operated LVDTs are small size contactless linear position sensors for both OEM and end user applications. They are available in full scale measuring ranges from ±0.025 inch (±0.63 mm) to ±2.0 inches (±50 mm) and offer 50%
|
$141.00 |
| View Product Detail Page |
AC LVDT Position Sensor Spring Loaded GHSA-750 Series
|
The Macro Sensors GHSA 750 Series of 3/4 inch diameter spring-loaded AC-LVDTs are designed for a wide range of position measurement and dimensional gaging applications. These rugged hermetically sealed sensors are constructed entirely of stainless steel and intended for general industrial use. The coil windings are sealed against hostile environments to IEC standard IP-68. Electrical termination is through a sealed axial connector; the mating connector plug is supplied with a unit. |
$427.00 |
| View Product Detail Page |
DC LVDT Position Sensor Spring Loaded 24 VDC Right Angle Connector GHSER-750 Series
|
The Macro Sensors GHSER 750 Series of 3/4 inch diameter spring-loaded DC-LVDTs are designed for a wide range of position measurement and dimensional gaging applications. These rugged hermetically sealed sensors are constructed entirely of stainless steel and intended for general industrial use. The coil windings are sealed against hostile environments to IEC standard IP-68. Electrical termination is through a radially mounted sealed connector, which results in a much reduced installed length. The mating connector plug is supplied with a unit. The through-bore design allows for air purging of the sensor’s bearings to remove potential contaminants. |
$782.00 |
| View Product Detail Page |
AC LVDT Position Sensor, 0.750" Diameter PR-750 Series
|
Macro Sensors’ PR 750 Series of 3/4" (19 mm) diameter AC-Operated LVDTs are general purpose contactless linear position sensors for both OEM applications and end user requirements. PR 812 and PRH 812 Series AC LVDTs are 0.812" (20.6 mm) diameter versions of the PR 750 Series and are designed primarily for use in legacy OEM applications and are not recommended for new designs. In most applications they are a cost effective form, fit, and function replacement LVDT for an OEM or user employing a competitor’s products of similar size and range.
|
$86.00 |
| View Product Detail Page |
AC LVDT Digital Controller / Indicator Single Channel DMI-A1 Series
|
The DMI Series Single-Channel Indicators can be used in conjunction with AC LVDTs to make up a comprehensive, reliable, measurement system. The combination can be applied to a wide variety of demanding measurement applications, such as in process gaging in automated assembly machinery, differential measurements in thickness gaging, and other measurements. Utilize the units' programmable set points, relays and PLC capabilities and you have an economical solution when you need control functions for direct measurements in smaller automated systems. The 5-digit (DMI) alphanumeric LED displays provide easy to follow setup prompts for all LVDT parameters using the intuitive scrolling text configuration menus. |
$798.00 |
| View Product Detail Page |
AC LVDT High Temperature Position Sensor Right Angle Connector HSTAR-750 Series
|
Macro Sensors’ HSTAR 750 Series of 3/4 inch (19 mm) diameter AC-operated LVDTs are designed for a wide range of position measurement applications. These are rugged hermetically sealed sensors, constructed entirely of stainless steel, and intended for use at high temperatures (400°F).
|
$564.00 |
| View Product Detail Page |
DC LVDT Position Sensor Spring Loaded 24 VDC Input GHSE-750 Series
|
The Macro Sensors GHSE 750 Series of 3/4 inch diameter spring-loaded DC-LVDTs are designed for a wide range of position measurement and dimensional gaging applications. These rugged hermetically sealed sensors are constructed entirely of stainless steel and intended for general industrial use. The coil windings are sealed against hostile environments to IEC standard IP-68. Electrical termination is through a sealed axial connector; the mating connector plug is supplied with a unit.
|
$661.00 |
| View Product Detail Page |
LVDT Cable Assembly
|
For AC or DC LVDTs shielded cable sold in 10, 30 and 50 foot lengths. Includes attached mating connector. |
$77.00 |
| View Product Detail Page |
Precision Gage Probes AC Operated .375" Diameter Threaded Body BBT-375 Series
|
The Macro Sensors BBT family of 3/8 inch diameter pencil-probe type gaging offers ultra-precise measurement of dimensions in a wide variety of Q.C., SPC, and industrial metrology applications. They utilize a linear ball bearing assembly precisely fitted to a hardened-and-ground, non-rotating probe shaft to minimize radial play and the effects of side loading. This results in the probes' exceptional repeatability of 0.000006 inch (0.15 µm). |
$559.00 |
| View Product Detail Page |
Precision Gage Probes AC Operated .315" Diameter Plain Body BBP-315 Series
|
The Macro Sensors BBP LVDT family of 8 mm diameter pencil probe -type gaging probes offers ultra-precise measurement of dimensions in a wide variety of Q.C., SPC, and industrial metrology applications. They utilize a linear ball bearing assembly precisely fitted to a hardened-and-ground, non-rotating probe shaft to minimize radial play and the effects of side loading. This results in the probes' exceptional repeatability of 0.000006 inch (0.15 µm). |
$533.00 |
| View Product Detail Page |
DC LVDT Position Sensor Spring Loaded +/- 15 VDC Input Radial Connector GHSDR-750 Series
|
The Macro Sensors GHSDR 750 Series of 3/4 inch diameter spring-loaded DC-LVDTs are designed for a wide range of position measurement and dimensional gaging applications. These rugged hermetically sealed sensors are constructed entirely of stainless steel and intended for general industrial use. The coil windings are sealed against hostile environments to IEC standard IP-68. Electrical termination is through a radially mounted sealed connector, which results in a much reduced installed length. The mating connector plug is supplied with a unit. The through-bore design allows for air purging of the sensor’s bearings to remove potential contaminants.
|
$837.00 |
| View Product Detail Page |
AC LVDT Position Sensor Spring Loaded Right Angle Connector GHSAR-750 Series
|
The Macro Sensors GHSAR 750 Series of 3/4 inch diameter spring-loaded AC-LVDTs are designed for a wide range of position measurement and dimensional gaging applications. These rugged hermetically sealed sensors are constructed entirely of stainless steel and intended for general industrial use. The coil windings are sealed against hostile environments to IEC standard IP-68. Electrical termination is through a radially mounted sealed connector, which results in a much reduced installed length. The mating connector plug is supplied with a unit. The through-bore design allows for air purging of the sensor’s bearings to remove potential contaminants.
|
$558.00 |
| View Product Detail Page |
LVDT Mounting Blocks MTD Series
|
LVDT Mounting Blocks Available for LVDT's with the following O.D.'s (outer diameters): - 0.375 inch O.D. Please choose when adding to shopping cart |
$31.00 |
| View Product Detail Page |
DC LVDT Position Sensor Spring Loaded Spring Loaded +/- 15 VDC input GHSD-750 Series
|
The Macro Sensors GHSD 750 Series of 3/4 inch diameter spring-loaded DC-LVDTs are designed for a wide range of position measurement and dimensional gaging applications. These rugged hermetically sealed sensors are constructed entirely of stainless steel and intended for general industrial use. The coil windings are sealed against hostile environments to IEC standard IP-68. Electrical termination is through a sealed axial connector; the mating connector plug is supplied with a unit.
|
$713.00 |
| View Product Detail Page |
AC LVDT Position Sensor Hazardous Locations HLR-750 Series
|
Macro Sensors’ HLR 750 Series of 3/4 inch diameter high reliability LVDT position sensors are specifically designed for use in gas turbine environments. Rated for operation to 300°F (150°C), these hermetically sealed AC-LVDTs are listed for Class I, Division 2, Groups A, B, C, D and Class I, Zone 2, Group IIC hazardous locations by Underwriters Laboratories. |
$981.00 |
| View Product Detail Page |
AC and DC 6-Pin LVDT Mating Connector PT06A-10-6S (SR) Straight or Right Angle
|
LVDT Mating Connectors |
$35.00 |
| View Product Detail Page |
4-20 mA LVDT Position Sensor Hermetically Sealed HSI-750 Series
|
The HSI 750 Series of 3/4 inch diameter, loop-powered 4-20 mA LVDT position transmitters is designed for a wide range of position monitoring and feedback applications. These rugged and robust devices are constructed entirely of TIG welded stainless steel and hermetically sealed against hostile environments to IEC standard IP-68. The input/output connections are made through a sealed axial connector, and a mating connector plug is supplied with each unit.
|
$616.00 |
| View Product Detail Page |
4-20 mA LVDT Position Sensor Spring Loaded GHSI-750 Series
|
The Macro Sensors GHSI 750 Series of 3/4 inch diameter spring-loaded, loop-powered LVDTs are designed for a wide range of position monitoring, feedback, and dimensional gaging applications. These rugged hermetically sealed sensors are constructed entirely of stainless steel and intended for general industrial use. The coil windings are sealed against hostile environments to IEC standard IP-68. The input/output connections are made through a sealed axial connector, and a mating connector plug is supplied with each unit. |
$725.00 |
| View Product Detail Page |
Precision Gage Probes AC Operated .375" Diameter Plain Body BBP-375 Series
|
The Macro Sensors BBP family of 3/8 inch diameter pencil-probe type gaging offers ultra-precise measurement of dimensions in a wide variety of Q.C., SPC, and industrial metrology applications. They utilize a linear ball bearing assembly precisely fitted to a hardened-and-ground, non-rotating probe shaft to minimize radial play and the effects of side loading. This results in the probes' exceptional repeatability of 0.000006 inch (0.15 µm). |
$543.00 |
| View Product Detail Page |
