OVERVIEW
Kit Includes:
• CHT FS Series Cylinder Head Temperature Sensor
-12, 14, or 18 mm ID
• Digital Pyrometer Gauge
CHT Sensor
• 12 mm, 14 mm, or 18 mm ID
• -40 °F to 1832 °F operating range (-40 °C to 1000 °C)
• Response time constant: 500 milliseconds
• Cable is 6 feet long (2 meters)
• Made in the USA
Digital Pyrometer
• Small Size ~ 1" high x 2" wide x 3" deep
• Max temperature "Peak hold" display capture capability
• High set-point alarm with internal relay contact
• °F/°C selectable
DIGITAL GAUGE & CHT SENSPR MADE IN THE USA
Our Cylinder Head Temperature (CHT) Sensors are designed for use in engine test and racing environments.
The flexible stem is made of Inconel, providing resistance to corrosion and high temperatures. We use top quality, long-lasting, high temperature, waterproof potting compound at the probe/wire transition, which prevents moisture from entering into the transition causing shorts. Our wires are FEP insulated to protect from shorting and corrosion.
IMPORTANT DISCLAIMER IF YOU ARE CONSIDERING USING THIS INSTRUMENT IN AN AIRCRAFT:
This instrument is not certified by the FAA. Fitting of this instrument to certified aircraft is subject to the rules and conditions pertaining to such in your country. Please check with your local aviation authorities if in doubt. This instrument is intended for ultralight, microlight, homebuilt and experimental aircraft. Operation of this instrument is the sole responsibility of the pilot in command (PIC) of the aircraft. This person must be proficient and carry a valid and relevant pilot’s license. This person has to make themselves familiar with the operation of this instrument and the effect of any possible failure or malfunction. Under no circumstances does The Sensor Connection or manufacturer condone usage of this instrument for IFR flights.
Options:
TECHNICAL SPECIFICATIONS
PMD1XT series Digital Pyrometer Gauge Technical Specifications:
Number of Inputs: | 1 |
Input: | Type K Thermocouple (default) |
Other Input Types: | J & T thermocouple, RTD, Voltage, mA (user selectable) |
Accuracy: | +/-0.2% of reading (+/- 1°C) |
Display Resolution: | 1°F (1°C) |
LED Display: | Red, 4-digit, 0.275 inch (7 mm high), 0.5 second update rate |
Microprocessor Sampling Rate: | 4 samples/second |
Microprocessor A/D Resolution: | 16 bit |
A/D Accuracy: | +/- 0.2% FS +/- 1 unit |
Environment: | 0 to 50C, 85% Max. RH (non-condensing) |
Operating Temperature: | +32 to +125°F (0 to +50°C) |
Front Bezel Rating: | IP51 |
Input Voltage: | 10 to 16 VDC (24 VDC powered available upon request) |
Current Draw: | < 100 mA @ 24 VDC |
Alarm Relay Contact Rating: | 1A @ 30VDC |
Case Dimensions: | 1" x 2" x 3" (24mm x 48mm x 75mm) |
Panel Cutout Dimensions: | 1.77" x 0.87" (45 x 22 mm)(1/32 DIN) |
Weight: | 2.1 ounces |
CHT-FS-K series CHT Sensor Specifications:
Thermocouple type: | Type K |
Accuracy: | +/-0.4% of reading or about +/- 1.1°C (Special Limits of Error) |
Operating Temperature Range: | -40 °F to 1832 °F (-40 °C to 1000 °C) |
Response Time: | 500 mS |
Stem & Ring Terminal: | Flexible Stem Length is 6 inches (152 mm) |
Cable: | Stainless steel over-braid cable with FEP insulated conductors, 6 feet |
