CHT Digital PMD1XT Pyrometer Gauge + CHT Cylinder Head Temperature Sensor Kit WS

OVERVIEW

Kit Includes:
• CHT WS Series Cylinder Head Temperature Sensor
• 10, 12, or 14 mm ID
• Digital Pyrometer Gauge

CHT Sensor
• 10 mm, 12 mm, or 14 mm ID
• -40 °F to 500 °F measuring range (-40 °C to 260 °C)
• Response time constant: 1500 milliseconds
• Cable is 6 feet long (2 meters) or 12 feet long (4 meters)
• Made in the USA

Digital Pyrometer
• Small Size ~ 1" high x 2" wide x 3" deep
• Max temperature "Peak hold" display capture capability
• High set-point alarm with internal relay contact
• °F/°C selectable


DIGITAL GAUGE & CHT SENSOR MADE IN THE USA


Our Cylinder Head Temperature (CHT) Sensors are designed for use in racing, tuning, and testing applications. Made in the USA from superior materials.

We use top quality, long-lasting, high temperature, waterproof potting compound at the probe/wire transition, which prevents moisture from entering into the transition causing shorts. Our wires are FEP insulated to protect from shorting and corrosion.

IMPORTANT DISCLAIMER IF YOU ARE CONSIDERING USING THIS INSTRUMENT IN AN AIRCRAFT:

This instrument is not certified by the FAA. Fitting of this instrument to certified aircraft is subject to the rules and conditions pertaining to such in your country. Please check with your local aviation authorities if in doubt. This instrument is intended for ultralight, microlight, homebuilt and experimental aircraft. Operation of this instrument is the sole responsibility of the pilot in command (PIC) of the aircraft. This person must be proficient and carry a valid and relevant pilot’s license. This person has to make themselves familiar with the operation of this instrument and the effect of any possible failure or malfunction. Under no circumstances does The Sensor Connection or manufacturer condone usage of this instrument for IFR flights.

Options:

Add 0 to 5 VDC Analog Output?
Add a Protective Aluminum Enclosure Housing?
Add an Audible Alarm Buzzer?
Thermocouple Type
Choose Sensor Cable Length
Choose LED Display Color and Input Power
Ring Terminal ID
SKU
KIT-PMD1XT-012-RD+CHT-WS-072-0010-KK-N
Availability
In Stock
0
Price
$94.25
Add to Cart

TECHNICAL SPECIFICATIONS

PMD1XT series Digital Pyrometer Gauge Technical Specifications:

Number of Inputs: 

1

Input:

Type K Thermocouple (default)

Other Input Types:

J & T thermocouple, RTD, Voltage, mA (user selectable)

Accuracy:

+/-0.2% of reading (+/- 1°C)

Display Resolution:

1°F (1°C)

LED Display:

Red, 4-digit, 0.275 inch (7 mm high), 0.5 second update rate

Microprocessor Sampling Rate:

4 samples/second

Microprocessor A/D Resolution:

16 bit

A/D Accuracy:

+/- 0.2% FS +/- 1 unit

Environment:

0 to 50C, 85% Max. RH (non-condensing)

Operating Temperature:

+32 to +125°F (0 to +50°C)

Front Bezel Rating:

IP51

Input Voltage:

10 to 16 VDC (24 VDC powered available upon request)

Current Draw:

< 100 mA @ 24 VDC

Alarm Relay Contact Rating:

 1A @ 30VDC

Case Dimensions:

1" x 2" x 3" (24mm x 48mm x 75mm)

Panel Cutout Dimensions:

1.77" x 0.87" (45 x 22 mm)(1/32 DIN)

Weight:

2.1 ounces

 

CHT-WS-KK series CHT Sensor Specifications:

Thermocouple type: 

Type K

Accuracy:

+/-0.4% of reading or about +/- 1.1°C (Special Limits of Error)

Operating Temperature Range:

-40 °F to 500 °F (-40 °C to 260 °C)

Response Time:

1500 mS

Available Inner Diameter Sizes:

0.39 inches (10 mm)
0.48 inches (12 mm)
0.57 inches (14 mm)

Cable:

Stainless steel over-braid cable with FEP insulated conductors, 6 feet or 12 feet