EGT Digital DPG-SD Pyrometer Gauge + Probe Kit - Diesel Commercial Industrial Series DP

OVERVIEW

THIS PRODUCT WAS DISCONTINUED MAY 2023


For Commercial Diesel Engines!

Kit Includes:
• Foul Proof Diesel Commercial Industrial EGT Probe
• Digital Pyrometer Gauge
• Adjustable Compression Fitting

(Recommended for fuel types: Diesel & Biodiesel)

EGT Probe
• Probe diameter 3/16 inch (0.187 inch) (4.75 mm)
• Enclosed Tip Sensing Junction (Foul Proof)
• Response time constant: 1200 milliseconds
• Includes 316 SS adjustable compression fitting
• Cable is 6, 12, or 25 feet long
• Made in the USA

Digital Pyrometer
• Small Size ~ 2-1/16" (52 mm) Round
• Max temperature "Peak hold" display capture capability
• High set-point alarm with internal relay contact
• °F/°C selectable
• Made in the USA


DIGITAL GAUGE & PROBE MADE IN THE USA


The Bio Diesel Exhaust Gas Temperature Sensor is specifically designed for use in Internal Combustion Engines operating on Diesel & Biodiesel or any system using a sulfuric or exhaust systems that are prone to fouling exposed junction EGT probes. This probe has been designed to withstand the rigors of marine and over the road trucking. It will also withstand the rigors of racing, tuning, and testing applications.

Our Exhaust Gas Temperature Sensors, Accessories and Electronics are in-stock and ready for fast delivery. Need help making a selection? Use our EGT Probe Comparison Chart. For additional pricing and technical questions, contact us now to speak to an experienced application engineer.

 

IMPORTANT DISCLAIMER IF YOU ARE CONSIDERING USING THIS INSTRUMENT IN AN AIRCRAFT:

This instrument is not certified by the FAA. Fitting of this instrument to certified aircraft is subject to the rules and conditions pertaining to such in your country. Please check with your local aviation authorities if in doubt. This instrument is intended for ultralight, microlight, homebuilt and experimental aircraft. Operation of this instrument is the sole responsibility of the pilot in command (PIC) of the aircraft. This person must be proficient and carry a valid and relevant pilot’s license. This person has to make themselves familiar with the operation of this instrument and the effect of any possible failure or malfunction. Under no circumstances does The Sensor Connection or manufacturer condone usage of this instrument for IFR flights.

Options:

Add a Gauge Pod Holder?
Add a Weld Bung?
Add an Audible Alarm Buzzer?
Choose Sensor Cable Length
Choose Gauge Bezel Ring Color
SKU
KIT-DPG-SD-B-1+EGT-DP-072
Availability
Discontinued
1
Price
$171.00
Add to Cart

TECHNICAL SPECIFICATIONS

DPG-SD series Digital Pyrometer Gauge Technical Specifications:

Input:

Type K Thermocouple (2 channel)

Input Resistance:

60k Ω

Display Range:

+32 to +2282°F (0 to +1250°C)

Accuracy:

<+/- 0.5% of Full Scale

Display Resolution:

1°F (1°C)

LED Display:

Red, 4-digit, 0.4 inch (10 mm high), 0.5 second update rate

Microprocessor Sampling Rate:

10 samples/second

Peak Capture Rate:

3 samples/second

Environmental Operating Humidity Range:

0 to 95% Max. RH (non-condensing)

Environmental Operating Temperature Range:

-40 to +185°F (-40 to +85°C)

Front Bezel Rating:

IP65

Supply Voltage:

+9 to +32 VDC

Current Draw:

50 mA (nominal)

Alarm Relay Contact Rating:

2 Amp

Case Dimensions:

OD: 2.00 (51 mm)
Length: 1.5 inches (38 mm)

Panel Cutout Dimensions:

2.05 (52 mm) Round Hole

Weight:

1.8 ounces (50 grams)

 

EGT-DP series EGT Probe Specifications:

Thermocouple type: 

Type K

Sensing Junction: 

Enclosed Ungrounded

Temperature Range:

-148°F to 2372°F (-100°C to 1300°C)

Accuracy:

+/-0.4% of reading or about +/- 1.1°C (Special Limits of Error)

Probe Diameter:

3/16 inch (0.187 inch) (4.75 mm)

Response Time:

150 milliseconds

Max Tip Insertion Depth:

1.1 inch (27.94 mm)

Outer Sheath Material:

Inconel 600 protective sheathing

Cable:

Stainless steel over-braid cable with FEP insulated conductors; 6, 12 or 25 foot

Included Compression Fitting:

316 stainless steel, adjustable, 1/8 inch –27 NPT male thread