EGT Digital DPG-SD Pyrometer Gauge + Probe Kit - Gas Race Series EP

OVERVIEW

THIS PRODUCT WAS DISCONTINUED MAY 2023


Kit Includes:
• Fast Response Gas Racing EGT Probe
• Digital Pyrometer Gauge
• Adjustable Compression Fitting

(Recommended for fuel types: Gasoline, Natural gas, Nitrous Oxide, & Alcohols)

EGT Probe
• Probe diameter 3/16 inch (0.187 inch) (4.75 mm)
• Exposed Tip Sensing Junction (Fast Response)
• Response time constant: 250 milliseconds
• Includes 316 SS adjustable compression fitting
• Cable is 6 feet long (2 meters) or 12 feel long (4 meters)
• Made in the USA

Digital Pyrometer
• Small Size ~ 2-1/16" (52 mm) Round
• Max temperature "Peak hold" display capture capability
• High set-point alarm with internal relay contact
• °F/°C selectable
• Made in the USA


DIGITAL GAUGE & PROBE MADE IN THE USA


The Exhaust Gas Temperature Sensor is specifically designed for use in racing, tuning, and testing applications. Made in the USA from superior materials. The Exposed Tip sensing junction provides immediate response to dynamic temperature changes.

Our Exhaust Gas Temperature Sensors, Accessories and Electronics are in-stock and ready for fast delivery. Need help making a selection? Use our EGT Probe Comparison Chart. For additional pricing and technical questions, contact us now to speak to an experienced application engineer.

 

IMPORTANT DISCLAIMER IF YOU ARE CONSIDERING USING THIS INSTRUMENT IN AN AIRCRAFT:

This instrument is not certified by the FAA. Fitting of this instrument to certified aircraft is subject to the rules and conditions pertaining to such in your country. Please check with your local aviation authorities if in doubt. This instrument is intended for ultralight, microlight, homebuilt and experimental aircraft. Operation of this instrument is the sole responsibility of the pilot in command (PIC) of the aircraft. This person must be proficient and carry a valid and relevant pilot’s license. This person has to make themselves familiar with the operation of this instrument and the effect of any possible failure or malfunction. Under no circumstances does The Sensor Connection or manufacturer condone usage of this instrument for IFR flights.

Options:

Add a Gauge Pod Holder?
Add a Weld Bung?
Add an Audible Alarm Buzzer?
Choose Sensor Cable Length
Choose Gauge Bezel Ring Color
SKU
KIT-DPG-SD-B-1+EGT-EP-072
Availability
Discontinued
1
Price
$171.00
Add to Cart

TECHNICAL SPECIFICATIONS

DPG-SD series Digital Pyrometer Gauge Technical Specifications:

Input:

Type K Thermocouple (1 channel)

Input Resistance:

60k Ω

Display Range:

+32 to +2282°F (0 to +1250°C)

Accuracy:

<+/- 0.5% of Full Scale

Display Resolution:

1°F (1°C)

LED Display:

Red, 4-digit, 0.4 inch (10 mm high), 0.5 second update rate

Microprocessor Sampling Rate:

10 samples/second

Peak Capture Rate:

3 samples/second

Environmental Operating Humidity Range:

0 to 95% Max. RH (non-condensing)

Environmental Operating Temperature Range:

-40 to +185°F (-40 to +85°C)

Front Bezel Rating:

IP65

Supply Voltage:

+9 to +32 VDC

Current Draw:

50 mA (nominal)

Alarm Relay Contact Rating:

2 Amp

Case Dimensions:

OD: 2.00 (51 mm)
Length: 1.5 inches (38 mm)

Panel Cutout Dimensions:

2.05 (52 mm) Round Hole

Weight:

1.8 ounces (50 grams)

 

EGT-EP series EGT Probe Specifications:

Thermocouple type: 

Type K

Sensing Junction:

Exposed, Ungrounded

Accuracy:

+/-0.4% of reading or about +/- 1.1°C (Special Limits of Error)

Probe Diameter:

3/16 inch (0.187 inch) (4.75 mm)

Response Time:

250 mS

Outer Sheath Material:

Inconel, melting point 2550°F (1400°C)

Cable:

Stainless steel overbraiding over Teflon™ insulated, stranded wires, 20 gage

Included Compression Fitting:

316 stainless steel, double ferrule, adjustable, 1/8 inch –27 NPT male thread