Features
• Fast Response
• Flexible Stainless Steel pad, can be attached to flat or curved surface
• Pad can be brazed, spot welded, or clamped to surface
• For measuring surface temperature of exhaust pipe or manifold
EGT PROBE COMPARISON CHART
MADE IN THE USA
Overview
The Exhaust Manifold or Pipe Surface Temperature Probe is designed for use in Motorsports or R&D Testing applications to measure the relative exhaust gas temperature by way of attachment to the surface of the manifold or pipe. They can be customized for OEM applications as well. The probe is made in the USA with superior materials, designed to withstand even the most rigorous operating conditions.
• Pad material is 304 stainless steel
• Pad dimensions are 1.0" x 1.0" x 0.01" (25mm x 25mm x 0.25mm)
• Pad can be brazed, spot welded, or clamped to surface
• Stem is flexible
• Type K thermocouple
Technical Specifications
• Type K Thermocouple |
• -148°F to 2192°F range (-100°C to 1200°C) |
• Special Limits of Error accuracy (+/- 0.4% of reading) |
• Probe sheath diameter 1/16 inch (0.062 inch) (1.6 mm) |
• Inconel 600 protective sheathing for longevity at high temperatures |
• Pad Dimensions 1.0" x 1.0" x 0.01" (25mm x 25mm x 0.25mm) |
• Pad material 304 stainless steel |
• Stainless steel over-braid signal cable with FEP insulated conductors; 6 foot |
• Response time constant: 300 milliseconds |
Shipping Notes
Ships from stock
We Ship World Wide! North America, South America, Europe, Asia, Australia - Just about wherever you are, we'll ship to you.
Why The Sensor Connection EGT probes are best in class:
• Our probe material is Inconel
(Inconel is extremely corrosion resistant, maintains hardness at high temperatures)
• Our lead wires are FEP insulated
(cheaper probes often use Fiberglass insulation that can absorb moisture, wires prone to shorting & corrosion over time)
• We use top quality, high temperature, waterproof potting compound at the probe/wire transition
(cheaper probes often use an inferior potting compound which can allow moisture to enter into the transition causing shorts, these cheap potting compounds also prone to breaking down over time)
• All of our EGT probes are handmade in the USA
IMPORTANT NOTE:
Please confirm with your instrument manufacturer that the instrument is compatible with a Type K thermocouple sensor.
Questions about what you need? Call us 248-636-1515 for technical support.