Once the gauge is powered on we are ready to begin the procedure.
Begin by pressing the GEAR key once (x1)
Next, using the up & right arrow keys, enter the programming code 0089
The gauge is now in the programming mode
The display will read “CorF”
Press the up arrow key five times (x5) until “Clr1” is in the display.
Press the gear key, then use the up arrow key to select the display color for Channel 1.
For this example, we will choose green.
Once the chosen color for Channel 1 is in the display, press the gear key to save the selection in the microprocessor’s memory.
Next press the up arrow key.
The display will read “Clr2”.
Press the gear key, then use the up arrow key to select the display color for Channel 2.
For this example, we will choose blue.
Once the chosen color for Channel 2 is in the display, press the gear key to save the selection in the microprocessor’s memory.
To exit the programming mode, press the arrow key once until End is in the display then press the gear key.
The gauge’s display will now show each channel with the selected colors.
Click the link below to shop the DPG-XR!