OVERVIEW
Kit Includes:
• Fast Response Gas Racing EGT Probes (x4)
• MPG-4C 4-Channel Digital Pyrometer Gauge
• Adjustable Compression Fittings
• Connectors
• Weld Bungs (optional)
(Recommended for fuel types: Gasoline, Natural Gas, Nitrous Oxide, & Alcohols)
EGT Probe
• Probe diameter 3/16 inch (0.187 inch) (4.75 mm)
• Exposed Tip Sensing Junction (Fast Response)
• Response time constant: 250 milliseconds
• Includes 316 SS adjustable compression fitting
• Cable is 6 feet long (2 meters) or 12 feel long (4 meters)
• Made in the USA
Digital Pyrometer
• 2-1/4" (57 mm) Round Gauge
• Recall Max temperature "Peak hold" capability
• Programmable High Temperature set-point alarm
• °F/°C selectable
DIGITAL GAUGE & PROBE MADE IN THE USA
The Exhaust Gas Temperature Sensor is specifically designed for use in racing, tuning, and testing applications. Made in the USA from superior materials. The Exposed Tip sensing junction provides immediate response to dynamic temperature changes.
IMPORTANT DISCLAIMER IF YOU ARE CONSIDERING USING THIS INSTRUMENT IN AN AIRCRAFT:
This instrument is not certified by the FAA. Fitting of this instrument to certified aircraft is subject to the rules and conditions pertaining to such in your country. Please check with your local aviation authorities if in doubt. This instrument is intended for ultralight, microlight, homebuilt and experimental aircraft. Operation of this instrument is the sole responsibility of the pilot in command (PIC) of the aircraft. This person must be proficient and carry a valid and relevant pilot’s license. This person has to make themselves familiar with the operation of this instrument and the effect of any possible failure or malfunction. Under no circumstances does The Sensor Connection or manufacturer condone usage of this instrument for IFR flights.
Options:
TECHNICAL SPECIFICATIONS
MPG-4C 4-Channel Digital Pyrometer Technical Specifications:
|
Input: |
Type K, Type J, & Type E thermocouple (ungrounded only) |
|
Number of Inputs: |
4 |
|
Display Range: |
-148 to +2192°F (-100 to +1200°C) |
|
Accuracy: |
+/- 5° (typical) over full temperature range |
|
LCD Display Resolution: |
160 x 128 graphic color LCD display |
|
LCD Backlight: |
Yes |
|
LCD Contrast: |
User selectable |
|
Microprocessor Resolution: |
12-bit (over sampled successive approximation) |
|
Environment: |
85% Max. RH (non-condensing) |
|
Operating Temperature: |
+14 to +140°F (-10 to +60°C) |
|
Front Bezel Rating: |
IP51 |
|
Input Voltage: |
8 to 30 VDC |
|
Current Draw: |
73mA @ 13.8V (backlight highest setting), |
|
Alarm Relay Contact Rating: |
Normally open, |
|
Enclosure: |
2-1/4” ABS, black in color, front or rear mounting |
|
Panel Cutout Dimensions: |
Drill round 2-1/4" (57 mm) hole| |
|
Weight: |
170 grams |
EGT Probe Specifications:
|
Thermocouple type: |
Type K |
|
Sensing Junction: |
Exposed, Ungrounded |
|
Accuracy: |
+/-0.4% of reading or about +/- 1.1°C (Special Limits of Error) |
|
Probe Diameter: |
3/16 inch (0.187 inch) (4.75 mm) |
|
Response Time: |
250 mS |
|
Outer Sheath Material: |
Inconel, melting point 2550°F (1400°C) |
|
Cable: |
Stainless steel overbraiding over Teflon™ insulated, stranded wires, 20 gage |
|
Included Compression Fitting: |
316 stainless steel, double ferrule, adjustable, 1/8 inch –27 NPT male thread |
DOCUMENTS & DOWNLOADS
VIDEOS
