EGT Digital PMDW Series Pyrometer Gauge + Probe Kit - Marine Engines

OVERVIEW

For Marine Applications!

Kit Includes:
• EGT Probe
• Marine Duty Digital Pyrometer Gauge
• Audible High Temperature Alarm
• Adjustable Compression Fitting
• Stainless steel weld bung
• 10, 30, 50, 70, or 100 feet of Extension Cable + Connectors

(Recommended for fuel types: Diesel & Biodiesel)

EGT Probe
• Probe diameter 3/16 inch (0.187 inch) (4.75 mm)
• Inconel 600 sheath
• Includes 316 SS adjustable compression fitting
• Cable is 6 feet long (2 meters)
• Made in the USA

Digital Pyrometer
• Small Size ~ 1.5" high x 3.0" wide x 1.75" deep
• Max temperature "Peak hold" display capture capability
• High set-point alarm with internal relay contact
• °F/°C selectable
• Front Bezel Rating: NEMA4X/IP65
• Power: 9 to 28 VDC
• Made in the USA

Also Includes:
• Audible Buzzer Alarm
• Stainless Steel Weld Bung Adapter
• 10, 20, 50, 70, or 100 feet of FEP insulated Extension Wire
• Male & Female wire connectors
• Silicon Rubber Protection Boot (x2)


DIGITAL GAUGE & PROBE MADE IN THE USA


The Bio Diesel Exhaust Gas Temperature Sensor is specifically designed for use in Internal Combustion Engines operating on Diesel & Biodiesel or any system using a sulfuric or exhaust systems that are prone to fouling exposed junction EGT probes. This probe has been designed to withstand the rigors of marine and over the road trucking. It will also withstand the rigors of racing, tuning, and testing applications.

Our Exhaust Gas Temperature Sensors, Accessories and Electronics are in-stock and ready for fast delivery. Need help making a selection? Use our EGT Probe Comparison Chart. For additional pricing and technical questions, contact us now to speak to an experienced application engineer.

 

IMPORTANT DISCLAIMER IF YOU ARE CONSIDERING USING THIS INSTRUMENT IN AN AIRCRAFT:

This instrument is not certified by the FAA. Fitting of this instrument to certified aircraft is subject to the rules and conditions pertaining to such in your country. Please check with your local aviation authorities if in doubt. This instrument is intended for ultralight, microlight, homebuilt and experimental aircraft. Operation of this instrument is the sole responsibility of the pilot in command (PIC) of the aircraft. This person must be proficient and carry a valid and relevant pilot’s license. This person has to make themselves familiar with the operation of this instrument and the effect of any possible failure or malfunction. Under no circumstances does The Sensor Connection or manufacturer condone usage of this instrument for IFR flights.

Options:

Gasoline or Diesel Engine?
Thermocouple Cable Length
SKU
MARINE KIT-PMDW+EGT-DP-072+BNG-SS+TXW-10FT
Availability
Out of stock - 4 weeks
0
Out of Stock
0
Price
$385.75
Add to Cart

TECHNICAL SPECIFICATIONS

PMDW series Digital Pyrometer Gauge Technical Specifications:

Number of Inputs:

1

Input:

Type K thermocouple (default)

Other Input Types:

J, T, E, R, S, B, N Type thermocouple (user selectable)

Display Range:

-328 to 2502°F (-200 to 1372°C); (default setting of K type thermocouple)

Accuracy:

+/-2.3 °F/°C

Display Resolution:

1°F (1°C)

LED Display:

4-digit LED, 0.5 inch (12 mm high), 1 second update rate, Red or Green

Microprocessor Sampling Rate:

1.25 samples/second

Environment:

-35 to +60C, 85% Max. RH (non-condensing)

Operating Temperature:

-30 to 140°F (-35 to 60°C)

Front Bezel Rating:

NEMA4X / IP65

Input Voltage:

9 to 28 VDC

Current Draw:

125 mA @ 24 VDC

Alarm Relay Contact Rating:

1A @ 30VDC resistive, 0.3A @ 125VAC resistive

Case Dimensions:

1.5" x 2.9" x 1.7" (38mm x 74mm x 43mm)

Panel Cutout Dimensions:

2.68" x 1.30" (68 x 33 mm)

Weight:

2.5 ounces

 

EGT-DP Series EGT Probe Specifications:

Thermocouple type: 

Type K

Temperature Range:

-148°F to 2372°F (-100°C to 1300°C)

Accuracy:

+/-0.4% of reading or about +/- 1.1°C (Special Limits of Error)

Probe Diameter:

3/16 inch (0.187 inch) (4.75 mm)

Response Time:

150 milliseconds

Max Tip Insertion Depth:

1.1 inch (27.94 mm)

Outer Sheath Material:

Inconel 600 protective sheathing

Cable:

Stainless steel over-braid cable with FEP insulated conductors; 6, 12 or 25 foot

Included Compression Fitting:

316 stainless steel, adjustable, 1/8 inch –27 NPT male thread

Included Weld Bung Fitting:

316 stainless steel,
Dimensions: 0.55" OD x 0.35" tall (24mm OD x 9 mm tall),
1/8 NPT female thread

 

2 Wire Audible Piezo Buzzer Alarm (included):

Voltage Range:

3-20 VDC

Current Consumption:

10 mA @ 12 VDC

Sound Pressure Level:

75 dB min. @ 30 cm/12 VDC

Resonant Frequency:

2700 Hz +/- 500 Hz

Operating Temperature:

-4F to +140F (-20C to +60C)

Mounting Centers:

1-9/64" (29 mm)

Size:

7/8" diameter x 5/16" tall (22 mm diameter x 8 mm tall)

Weight:

4 grams