Protective Box Enclosure for "SuperLite" PMD1XT and PMD2XT Gauge

• Enclosure dimensions: 1.5" tall x 2.5" wide x 3.5" deep (38 x 63 x 89 mm)
• Enclosure weight: 4 oz

This protective enclosure is high quality durable, extruded aluminum housing, painted in a black crinkle finish. The protective enclosure is designed to protect the meter from impacts and provides a suitable way of securely mounting the meter.

The enclosure has the correct cutout for the PMD1XT and PMD2XT meter‘s 1/32 DIN (24 x 48 x 75 mm) to snap in and fit tightly. EGT and power wires exit the back of the enclosure using a conveniently placed outlet. The enclosure is easily modifiable to attach to a surface of your choice.

NOTE: Does NOT fit The PMD-W Meter with Sealed Front Bezel

IMPORTANT DISCLAIMER IF YOU ARE CONSIDERING USING THIS INSTRUMENT IN AN AIRCRAFT:

This instrument is not certified by the FAA. Fitting of this instrument to certified aircraft is subject to the rules and conditions pertaining to such in your country. Please check with your local aviation authorities if in doubt. This instrument is intended for ultralight, microlight, homebuilt and experimental aircraft. Operation of this instrument is the sole responsibility of the pilot in command (PIC) of the aircraft. This person must be proficient and carry a valid and relevant pilot’s license. This person has to make themselves familiar with the operation of this instrument and the effect of any possible failure or malfunction. Under no circumstances does The Sensor Connection or manufacturer condone usage of this instrument for IFR flights.